![]() ![]() ![]() 1.Is the Ink Tube correctly routed? 1.Route the Ink Tube correctly. 1.Is the CR Guide Plate free from dirt, and adequately lubricated? 1.Clean the CR Guide Plate and lubricate it as specified. 1.Is the Carriage Shaft free from dirt, and adequately lubricated? 1.Clean the Carriage Shaft and lubricate it as specified. 1.Is the Upper Paper Guide correctly installed? 1.Install the Upper Paper Guide correctly. 4.Is the CR Scale correctly installed? 4.Install the CR Scale and the torsion spring correctly. 3.Is the CR Scale damaged? 3.Replace the CR Scale with a new one. When the contamination is severe, replace the CR Scale with a new one. 2.Is the CR Scale surface clean? 2.Wipe any dirt off the surface of the CR Scale. 1.Is the CR Scale properly centered in the slit of the CR Encoder? 1.Install the CR Scale correctly. 2.Is the FFC correctly connected to the connector on the CR Encoder? 2.Connect the Head FFC correctly. 1.Is the CR Encoder damaged? 1.Replace the CR Encoder with a new one. 3.Does the CR Motor operate normally? 3.Replace the CR Motor with a new one. 2.Is the CR Motor cable damaged? 2.Replace the CR Motor with a new one. Remedy: 1.Is the CR Motor cable properly connected to CN21 connector on the Main Board? 1.Connect the CR Motor cable correctly to CN21 connector on the Main Board.Description: Fatal error (printer mechanism).Turn off the printer and turn it on again. Display: A printer error has occurred.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |